The compact Kotetsu Mark II CPU-Cooler offers many improvements over its predecessor. Features include: a height of only 154mm, asymmetric heatsink design for maximum memory and graphics card compatibility, an optimized and easy-to-install mounting system, as well as a 120mm fan from the award winning Kaze Flex 120mm PWM series. Four nickel-plated heatpipes and a embossed topplate provide an appealing and sophisticated look. In summary, the Kotetsu Mark II offers a convincing overall concept at a low price.
H.P.M.S. III (Hyper Precision Mounting System III)
The secure and user-friendly Hyper Precision Mounting system centers around a preassembled mounting bar, which features spring-loaded screws to guarantee perfect contact pressure. In combination with an updated backplate and rubber / plastic spacers the system offers a convenient installation process and compatibility to all current sockets including AMD®s AM4 and Intel®s LGA 2066 platforms.
Kaze Flex 120 PWM Fan
The Kotetsu Mark II is equipped with a PWM fan from the award-wining Kaze Flex series, operating in a range from 300 to 1200 RPM. The self-contained liquid bearing (Sealed Precision FDB) reduces friction and wear to a minimum, resulting in an average lifespan of 120 000 hours. Rubber pads mounted in the fan frame have a decoupling effect and prevent the transfer of vibrations.
Asymmetrical and low height design
Aiming for maximum compatibility the heatsink is not centered above the baseplate, but slightly offset to the side and back. This assymetrical design allows for unrestricted use of all memory slots. It also points the heatsink away from the graphics card, leaving enough space for even the bulkiest GPU coolers. With a compact height of only 154 mm the Kotetsu Mark II easily fits all standard PC Cases.
Kotetsu Mark II CPU Cooler
Socket LGA2011 / 2011-v3 (Square ILM)
Please note that an original backplate with screw mounting is needed for installation on mainboards with AMD sockets. Please check before buying if the backplate is fixed by screws (example)! If the backplate uses plastic-pins, mounting of this cooler is not possible.
130 x 154 x 83 mm / 5.12 x 6.06 x 3.27 in (Including fan more dimensions)
645 g / 22.8 oz (Including fan)
Mounting parts for Intel and AMD sockets, fan, fan clips, thermal grease, installation manual.
Nickel-plated Copper 38 x 38 mm (more Info)
Kaze Flex 120 PWM
120 x 120 x 27 mm / 4.72 x 4.72 x 1.06 mm
4.0 ~ 24.9 dBA
16.6 ~ 51.17 CFM
300 rpm (±200) ~ 1200 rpm (±10%)
Voltage / Current:
DC 12V / 0,13A
0.75 ~ 10.3 P